Rittal’s new TS 8 isolator door cover, when deployed in tandem with the actuation mechanisms, adjacent door locking and interconnecting rods, fulfils all requirements of the UL 508 A standard. (A requirement for the North American market.)
Featuring a raft of technical updates and design features, Rittal’s TS 8 isolator door cover range, prevents operators from opening the enclosure and touching live electrical components. The isolator door cover is mounted on the side of the enclosure to which an actuator lever or isolator switch, as the master switch, can be integrated. As a result, the door can only be opened when the isolator switch has been activated and the electricity supply to all components in the enclosure has been disconnected.
A complete row of bayed enclosures can be made safe using a single isolator door cover. The door of the neighbouring enclosure is then operated via the adjacent door latch.
Easy to assemble, the 125-mm-wide isolator door cover can be mounted on either the left or right of the enclosure by a single person. The revised locking mechanism consists of a small number of compact parts, is easy to assemble and can be deployed for all approved actuator levers. Standard side panels can be fitted on the side opening of the isolator door cover with automatic potential equalisation.
Rittal Enclosures, Power Distribution, Climate Control, IT Infrastructure, 19″ Racks, Software & Service – http://www.rittal.co.uk