Blue e+ Launch Events

Rittal will proudly introduce the World’s first Blue e+ Principle at a series of locations across the UK in October 2015. With its innovative hybrid technology, the new Blue e + delivers Efficiency, Versatility, Safety & User Friendliness that can provide energy savings of up to 75%. Blue e+ is simply the world’s most economical cooling unit.

The Crystal: London – 6th October 2015

The Crystal, located at the Royal Victoria Docks in London, is home to the world’s largest permanent exhibition on the future of cities and one of the world’s most sustainable buildings/events venues.

  • Venue: The Crystal, One Siemens Brothers Way, Royal Victoria Docks, London E16 1GB
  • Arrival from 10.30am, first presentation to commence at 11.00am
  • Last presentation 3pm
  • Lunch & entry to the Crystal sustainability exhibition is included for all

The National Railway Museum: York – 12th October 2015

The National Railway Museum has an award winning world class collection of Britain’s record breaking locomotive heritage.

  • Venue: The National Railway Museum, Leeman Rd, York. YO26 4XJ
  • Arrival from 10.30am, first presentation to commence at 11.00am
  • Final presentation at 2.30pm
  • Lunch & entry to the Railway Museum is included for all

Jaguar Land Rover: Solihull – 13th October 2015


The Concorde Experience: Manchester – 14th October 2015

At the home of the revolutionary engineering marvel Concorde, You will have the chance to board and tour Concorde.

  • Venue: The Concorde Tour, The Runway Visitor Park, Sunbank Lane, Altrincham. WA15 8XQ
  • Arrival from 10.30, the morning presentation to commence at 11.00am,
  • Lunch & entry to the Concorde Experience is included for all
  • The afternoon presentation will begin at 1.30pm

For more details and to book your place email:

Blue e+ A4 landscape banner 540 380 0915

Rittal Enclosures, Power Distribution, Climate Control, IT Infrastructure, IT networking Racks, Software & Service – follow us on twitter

Rittal’s enclosure solutions on show at Offshore Europe 2015

Rittal will be out in force, showcasing its top-of-the-range  system at this year’s Offshore Europe 2015 event in Aberdeen.  With many specific and often high-risk security issues in the oil and gas industry, safety remains of paramount importance in the use of correct equipment and preventing sources of ignition. Visitors to Rittal’s Stand 4E120 will be able to view a range  of Rittal’s innovative modular enclosures, power distribution  and climate control systems, routinely specified as the No 1 choice throughout the industry for protecting critical equipment. Rittal’s technical experts use ingenuity and smart thinking  in areas such as optimising physical work spaces while its high-quality designs minimise the damaging effects  caused by the tough operating conditions typically  found in offshore environments.

What’s more, thanks to  Rittal’s local enclosure manufacturing base in Plymouth,  its product offering can be readily adapted to meet most  customer needs. ​ Also on show will be motor control centres based on the  market leading TS 8 enclosure platform.

Complimenting this is  design and calculation software which can help users  correctly identify the heat dissipation requirements  within enclosures, and support their application and installation.  In addition, visitors will be able to review Rittal’s busbar system,  its extensive range of wall-mounted enclosures and the  TS IT which is a fast, simple and flexible enclosure system  featuring snap-in technology, flexible internal configuration  and intelligent cable management.  To find out more about Rittal’s enclosure solutions and accessories for the oil and gas industry, come to Stand 4E120  at Offshore Europe, 8-11 September 2015, at AECC, Aberdeen.

Further information at and, or on twitter @rittal_ltd.

Rittal the system fri130313500

Rittal Enclosures, Power Distribution, Climate Control, IT Infrastructure, IT networking Racks, Software & Service – follow us on twitter

New Busbar System Rittal Ri4Power 185mm for Safe and Quick Switchgear

Protecting people who work with electrical switchgear is clearly  of paramount importance.  Their guaranteed safety can often only be achieved through the use of tested and standardised products and equipment.  But switchgear components must also be tailored to individual needs and be simple and quick to make and assemble.

Rittal addresses all these considerations within its busbar system “Ri4Power 185mm” and its new (Version 6.3) of the Rittal Power Engineering software.

Energy distribution in industrial plants and buildings often depends on the subsequent use of the power supply, which means distribution is typically individually configured within different outlet circuits – although users can still expand or convert their energy supplies at a later date if required.

It goes without saying that energy distribution must always be safe and comply with the statutory requirements, all of which is integral to the new “Ri4Power 185mm” busbar system.

This clever modular system consists of standardised and tested products which all meet the requirements of IEC 61 439 for low-voltage switchgear assemblies with design verification.  Its smart design is a notable strong point.  It is easy to assemble with a modular configuration and ideally adapted to the Rittal TS 8 bayed enclosure.  In addition, the contact hazard protection of the busbar system, which protects the user from touching electrically live parts, is mounted before the switching and protective devices are attached. This uses standardised products, meaning individual and laborious preparation of cover plates is no longer necessary – helping
to save both the installer and user both time and money.

Configuring moulded-case circuit-breakers with adaptors or NH fused-switch disconnectors is simple; the devices are used in the frame of the cover and they contact the busbars through the cover. Subsequent retrofitting or extension is also possible without having to adjust the contact hazard protection later on.

To help support both planning and configuration, Rittal Power Engineering has been extended to include another program module for the “Ri4Power 185mm” within its latest version (6.3). The enclosure panels are selected according to user requirements and fitted out as required. The parts lists and drawings are automatically generated in the background, allowing a clear picture of the final construction as early as at the quotation phase. After the configuration phase is complete, the necessary design verification can be automatically generated for each switchgear unit.


Rittal Enclosures, Power Distribution, Climate Control, IT Infrastructure, IT networking Racks, Software & Service – follow us on twitter